Alice 828 individual outs.

Alice 828 individual outs.

Postby Googoo » Mon Jul 16, 2018 12:37 pm

Hi Ted, if I use the individual outs on the 828 does that channel still come out of the main stereo out as well? Are they pre/post eq/fader? Thanks.
Googoo
 
Posts: 5
Joined: Sun Aug 14, 2016 9:43 pm

Re: Alice 828 individual outs.

Postby Ted Fletcher » Mon Jul 16, 2018 8:38 pm

I'm going to be a bit rough on you...
Individual channel outs are always a post fader feed and they don't affect the main stereo bus output. You should know this.
The output is post mic amp, post EQ and post fader. The stereo output is unaffected.
The purpose originally was to be able to take a feed from each channel to a multi-track machine and use the stereo out just as a real-time monitor. Of course, that was before the introduction of ProTools!
Nowadays, like everyone else, I record individual tracks (using my BRICK2 wherever possible!) and mix down using an old 828S, the perfect analogue mixdown. :)
Ted Fletcher
 
Posts: 480
Joined: Tue Feb 12, 2008 2:06 pm

Re: Alice 828 individual outs.

Postby Googoo » Mon Jul 16, 2018 8:53 pm

Thanks Ted.
Googoo
 
Posts: 5
Joined: Sun Aug 14, 2016 9:43 pm

Re: Alice 828 individual outs.

Postby WHoops » Wed Oct 03, 2018 1:12 pm

Personally I never felt Post Fader Direct Outs that usefull, I preffer direct outs Pre-Fader.

I modified my 828 for Pre fader Direct Outs, really easy to do

Thanks
WHoops
 
Posts: 15
Joined: Mon Jan 10, 2011 3:36 am


Return to Ask Ted

Who is online

Users browsing this forum: No registered users and 1 guest

cron